Leak coming from A833 bell housing. Help!

One last piece of advice, I just had to fix the same kind of leak (shaft seal was okay but I replaced it also) and when I pulled it down I found the side walls of one of the bolt holes in the bearing cover broke open causing the fluid to run out the bolt hole and into the same area. In case you don't know the bearing cover has oil flowing through the cover a lot. Talked to Brewers and they told me that was normal to happen on one or more holes broken through and they just use red RTV after you clean the threads out and seal the holes by filling the bolt cavity with the RTV, I also got a replacement set of cover bolts and the bolts went in great. Leak is gone.