Stop in for a cup of coffee

-
No clue what is up with it now was running great then just would not start. Tester saying distrib if it ever cools down will pull it noy much in there just a hall plate. Maybe that just happened to go bad at the same time as doing new injectors! Just my world at times. Need to pick up a crapload of beer in Cans, got a heads up a week ago on this it is for real.
 
No clue what is up with it now was running great then just would not start. Tester saying distrib if it ever cools down will pull it noy much in there just a hall plate. Maybe that just happened to go bad at the same time as doing new injectors! Just my world at times. Need to pick up a crapload of beer in Cans, got a heads up a week ago on this it is for real.
Beer shortage?
 
Still not running Hoppy?
Well the starter solenoid was pitted and stuck, the lean turned out to be a TPS switch, was running great just to change them I got two new injectors and put them in, and now looks lke the distrib took a crap. Just out in the Middle of the drive have to pull it and change out the pick up plate, hopefully that is it. Want to do a scrap run before everything closes up again in a few weeks IMO.
 
Just Aluminum
Beer shortage?
for making cans. We send our scrap out overseas to get processed, well not much coming back in to make cans out of. Friend told me about it a while ago, bottles will be fine, forget about kegs already hard to find since the bars were closed and they basically stopped filling them.
 
I also want to get a couple of drums of diesel for the heater before the prices go up again, 1.89 here now.
 
I know. I took the trailer for those trusses and tin and lost my brakes. Was not fun. Now I have to fix that before I can go get other materials
 
Morning. scrap isnt worth hauling here. I have tons to get rid of.
 
Just want the trailer unloaded actually. Have a bunch of copper wire and prob 100lbs of cans to get rid of also will pay for the gas at least.
 
Not really worth it here either. I have to travel far enough that you have to have a good load to make it pay
 
Did get some primer down yesterday before it got way to hot/humid, now I can see all the issues at least. Have to ask Ron if I can borrow his durablock set again.
DSC09447.JPG
DSC09448.JPG
DSC09449.JPG
 
The contractors are starting on the roof today. Major project!
Good thing it wasn't here. It rained all night and will off and on all day. A good chance of rain Tuesday, Wednesday, and Thursday. I'm tired of it.
 
Morning MOPAR dreamers. It's a soggy start to the week here!! Rain-rain-and more rain!!
 
Any one have a distributor picgtail for the round 3 pin plugs 88 and up? Cant find one new need one for the distrib tester.
 
No rain in the forecast for the next week. Good. Have 1-1/2 yards of gravel to unload. Have to shovel a bunch of it.
 
-
Back
Top