Can you use a tuning kit for the Edelbrock AVS in an original 70 Carter AVS?

Before you do anything make sure your carb is clean and all the adjustments are good. All those rod are two step rods, and the jets are 2 step also. You would need to change jets, rods, pistons, and covers to use them. Then you loose the finer 3 step fuel curve. Might be better to drill a spare set of primary jets if you need something richer. Or sand a spare set of rods.
Thanks 66. Yes carb is clean and I did go over the adjustment specs. Good idea on drilling a spare set of jets. I might try that.