65 barracuda exhaust

-
F

Frank Dinatally

Well-Known Member
Joined
Nov 2, 2019
Messages
97
Reaction score
42
Location
Pennsylvania
Hi everyone
I would like to switch from single exhaust to duels. Is there a conversion kit made for doing this or is there a crossmember made that would make it easer to the pipes. Thanx in advance
 
@cosgig used to modify the cross-members if I remember correctly. None made for early A's with duals. Check with Accurite LTD and Flowmaster for dual exhaust kits.
 
I believe Accurate mentions the crossmember has to be modified.
 
I did the trans crossmember from details from a post on here in my 66' Barracuda in my shop - really easy..
I went TTI - called Mike and gave him the exhaust manifold cast numbers and they made the complete 2-1/2" system.
Cost was like $800.00 but came with everything I needed.
IF I had to do it again- I'd go 2" because on my 318 with factory manifolds its too much exhaust noise inside cabin.
I will add a picture from my phone in a minute. Gotta switch devices.
 
ADF1398F-935A-4C64-9A98-F906CB0E6097.jpeg
9E8FA640-BBEB-412F-84C1-F8D252F94C5C.jpeg
ABD37681-B1BA-4B8A-95E4-040A7CDFD655.jpeg
A72E3D61-B94E-427D-AC06-31846E00B5A8.jpeg
 
get a 2.5 pipe coupler and cut in half lengthwise, cut out the trans mount and weld in the 1/2 shell. Trim to taste.
 
toolmanmike said:
@cosgig used to modify the cross-members if I remember correctly. None made for early A's with duals. Check with Accurite LTD and Flowmaster for dual exhaust kits.
Click to expand...

I’m still doing them, but it’s becoming harder to find any cores to work with. I just did the only 2 I had for a couple of customers!

73B6A3D7-FDEF-42BC-A7D2-4A5B0446B3B8.jpeg
 
You must log in or register to reply here.
-

Back
Top