74 360 dart sport
Well-Known Member
I bought my 1974 dodge dart 360 sport 4 speed and some parts came in a box so I do not know what the 2 wedges and big thick nut is for and where do they go thanks
What are these for and where do they go
- Thread starter 74 360 dart sport
- Start date
-
The wedged look like those used to put a new handle on a hammer.
The big nut might be for a vacuum line or the vac advance can
The big nut might be for a vacuum line or the vac advance can
I wouldn't toss the big nut. There was someone looking for a manifold plug bolt, you should post a photo of the back side and the dimensions
I think I have seen brake lines screwed into that big nut. Is ur car a 360 wedge. Lol. Kim
The big nut is probably the nut that holds the brake booster brace to the firewall.
Wow, I actually have a picture that shows it.
Wow, I actually have a picture that shows it.
harrisonm
Well-Known Member
LOL. Make sure they are for a different make. Sell a Dodge and put in some Ford and GM parts. Make sure that FOMOCO and GM are not present. Also, toss in a few Lowes parts.
74 360 dart sport
Well-Known Member
Thank you that is where it goes
That’s not the same nut. Kim
74 360 dart sport
Well-Known Member
Lord Sparky
Well-Known Member
Chevy junk, stripped bolts and stuff.
your repeating your self
OP, that is the wrong location. BTW, those wedge things do not belong to the car.
The hole you have it in should have a body plug. The brace attaches down lower. I will try to get a pic on my other car as it should be clearer.
kimmer, why do you say that? Looks to be the brace nut to me. Its a special nut that keeps the firewall from flexing.
The hole you have it in should have a body plug. The brace attaches down lower. I will try to get a pic on my other car as it should be clearer.
kimmer, why do you say that? Looks to be the brace nut to me. Its a special nut that keeps the firewall from flexing.
For some reason I don’t see it on the fire wall. All I see is the one on the inner fender. Kim
Circled in red. The nut goes behind the lower booster brace. Its a large hex nut (about 3/4") with small threads (5/16 I think). It gives the brace more surface are so the sheet metal does not crack. Without these two braces that booster really moves around.
It goes just to the left of the oval hole (used for manual trans linkage, plugged for auto)
Pic is of my unmolested 73 340 dart.
It goes just to the left of the oval hole (used for manual trans linkage, plugged for auto)
Pic is of my unmolested 73 340 dart.
Ok, gotcha now. I learned something today. Thank u. Kim
74 360 dart sport
Well-Known Member
Thank you so much mopar mike that is where I put it I was joking when I posted it in the plug hole just a little humor
-
