K frame lowering blocks

I don't know the answer but there has been plenty of discussions on this..........
hemi dart k member lowering spacers - Google Search

And this

K member shims

See post 13

"
I am in possession of a copy of the "AUTHENTICITY GUIDE 1968 DART & BARRACUDA HEMI SUPER STOCK" written by Jim Schild with Larry Griffith.

This guide goes into great detail on the history and construction of the 1968 Hemi Darts and Barracudas.

There is info on the K frame and the motor mount and steering mount and the 1/2" X 2" X 2" spacers.

The rear spacer had 25/32 holes on center and the fronts had 7/8 holes on center. The 4 attaching screws where 1/2" longer than the stock bolts with a part number of 2836892.

I can not find any mention of any transmission mount mods anywhere in this manual, so I would "assume" ther were no mods in that area.

The manual dose show and describe the mods to the 4 speed shifter mounting plate to raise and move the shifter to the rear a small amount.

Hope this info helps some.


By the way Tom, very nice work, as usual.


Herb"