LED signal lights on a 74 Dart
To release the terminal look at the connection side of the plug, you should see a small opening above the entry slot. You need to push the terminal in from the back and insert a really small flat screwdriver in from the front. (I have some jeweler screwdrivers that are tiny)You have to push it in and press down on the terminal to release the clip.
See the tab that sticks up? That's what you have to bend down. Once it's out, pry the tab back up and install it in the correct slot in the connector.
The wire swap worked for me as well. Never had this occur before, and I've done 5 or 6 cars & trucks. This is the first Mopar though.
To release the terminal look at the connection side of the plug, you should see a small opening above the entry slot. You need to push the terminal in from the back and insert a really small flat screwdriver in from the front. (I have some jeweler screwdrivers that are tiny)You have to push it in and press down on the terminal to release the clip.
See the tab that sticks up? That's what you have to bend down. Once it's out, pry the tab back up and install it in the correct slot in the connector.