360-1 Indy 245 cnc heads

After my 2.2 mile walk today I made three stops for my son trying to find some starter wire anchors for a car he is working on for a Friend with the heads I flow tested. Couldn’t find any so I grabbed my Harbor Freight list I always have nearby and set off on the 45 mile round trip and they had them. 170.00 later I set off for home. I didn’t get a chance to organize the flow sheets so hopefully tomorrow. I will say I love my flowbench and digital electronics but where a fluid manometer can’t react fast enough to catch “jumpy” numbers a digital bench will. I don’t have or use a button to set my number so I usually list the high and low at a given lift. To guys that play with flowbenches they will understand easier what I’m trying to say. When I port heads I always try to calm that jumpiness and the used head shows that somewhat. The bolt bulge is pushed over “not enough” and the cnc Ridge was removed from the shortside. Not worth the 1400.00 charges but that’s another story. Hope that included porting the intake. I didn’t even really look at it or I would have probably had it on my porting bench. I didn’t reread all of this so I hope it makes sense. Lol