Barracuda vent window adjustment

A bit too close up a photo to show all the mounting points, but, one is visible in your photo. It's the one with the nut and square washer forward of the window regulator post. Like I mentioned before, the lower one is at the bottom of the door. Just follow the glass divider all the way down. The two lower vent frame bolt access holes should be the ones under the Barracuda door emblem. Just gently pop those emblems off......they just snap in place. While you're inside that door, check all the guides/felts/channels and replace as necessary, lube EVERYTHING that moves with some good spray grease, and inspect the door glass bracket felt and plastic rivet. Chances are the door latch release rod sleeve is worn out or totally gone too. Not super important, but, it keeps that rod from rattling in it's guide.