Harvesting the carcass

My HF spot weld cutter worked fine for taking out the inners of my 65 (a big POP! after the last one was cut, it was still under tension with the front on jackstands behind the wheels) I didnt even flip the blade, but the live center is a joke: take a center punch or better yet a 1/8 drill and core the center so the cutters center can index in something or else it will skate something fierce. It took about 7-10 seconds for each spot weld if I remember after I center drilled them. That blade is hard for a $5 buck throw away tool. I think I had about 40 per side or it seemed like it. ~ One every 4 inches...and its loud. Like working on a drum.