BOLT IN REAR SUSPENSION ?

took the leaf spring out then put the wheel/tire up in place moved it over against the inner wheel well marked it. did some cutting I cut an 1/2 inch off the inner wheel well pounded it in. Then put the tire back in place centered it. Now I have around 3/4 of an inch at the inner quarter lip & at the inner wheel well. Will clean it up then weld it up when I have access to a welder. Now all I have to deal with is the leaf spring clearance. Not sure the offset idea will be enough. Be nice if I could buy a kit really cheap so I could find out. Then if it didn't then no big money lost. Don't want spend that kind of money & hope it works. I will post some pictures so everyone can see what I am taking about. I might also have to do something about the bulge that is just above the wheel well lip on the outter wheel well.