Stop in for a cup of coffee

No I fixed the crack. I had a crack near the screw hole on the rear interior panel. No matter what I did the crack would re-appear.
John an old paint and body guy, cut a shallow grove in the plastic taking out the crack. He filled it building with epoxy, building it up slowly until it was level. We then sanded it down even.
His buddy thought I'd have to skim coat it before painting, but John said I was ok. I think I'll go with John.
He also took a heat gun, wood clamps, with a piece of 2x4 and straightened out a little plastic warp caused by a previous owner over tightening the screws. A neat process for me to watch.