Front Suspension Travel

I know Calvert recommends at least 5".

How is it measured?

Is it total travel, from completely collapsed to fully extended?

Or is it from ride height to fully extended?

It seems that if they mean overall travel, the effectiveness would depend on how low (or high) the torsion bars are set.

If they mean from static ride height to fully extended, I can see that.

With 1/2" longer than stock upper ball joints, and all but about 1/2" of the UCA snubber cut off, I have 3", at ride height. (Ride height to fully extended.)

Measuring total travel (fully extended), I get 4". I can get a little more, as I haven't cut the LCA snubber.

Either way, how do I get at least 5"?

Okay, size matters, and Calvert says length does too.
:lol: