64 Dart Rewire
And the engine compartment
I know this is the fusible link for my alternator. Should I use their suggested NAPA voltage regulator or use the one already on the firewall? I can post a picture of their connector and harness for the alternator.
I believe the yellow piece on the left/center is the ignition and the connector on its right Is the bulkhead connector? That little bar behind the yellow is the ammeter? Only one wire so not sure stuff connected. And what’re the Two connectors all the way to the right?
This is the voltage regulator, correct? Following the factory diagram I believe this is it.
These hoses run to the heater core, I’m honestly not sure I have the right size, since both don’t fit under the holder on the valve cover together. What’s that white bar on the top right with some wires?
And the engine compartment
I know this is the fusible link for my alternator. Should I use their suggested NAPA voltage regulator or use the one already on the firewall? I can post a picture of their connector and harness for the alternator.
I believe the yellow piece on the left/center is the ignition and the connector on its right Is the bulkhead connector? That little bar behind the yellow is the ammeter? Only one wire so not sure stuff connected. And what’re the Two connectors all the way to the right?
This is the voltage regulator, correct? Following the factory diagram I believe this is it.
These hoses run to the heater core, I’m honestly not sure I have the right size, since both don’t fit under the holder on the valve cover together. What’s that white bar on the top right with some wires?