Front Suspension Travel

On the pass side, I have 5 5/8". Dr. side, 4 7/8". On the dr. side, the LCA, torsion bar adj. bolt and the tie rod all hit a header tube at about the same point, limting the travel compared to the pass side. I don't know what to do there.

I reinstalled the snubbers, which are only 3/8" now. They compress to 1/4" with the UCA resting on them. That affects the travel just a bit.

I don't have a shock to measure extended travel. I measure about 16 1/2". I have to see if that's longer than a stock length shock. If so, I'll have to order a shock that's longer. Compressed is about 12 3/4".