8-3/4 axle seals?

Okay guys, I tore into the rearend. I went cheap, didnt replace the bearings. But, I packed the bearings full of grease and replaced the seals. I decided to put it back together and try to adjust the end play (because I really didnt want to pull the diff) well, a little over 2 full turns and the end play is fixed! So, when someone gives you a rearend and says it's good to bolt in and go, you should still go ahead and check out the basics on it. Someone apparently pulled this apart and didnt do this right!
I put the end play at about .008! Nice and tight! Thanks everyone for the help!!!