First time going to the track. Any advice?
I have a gas adjust shock no front sway bar. 1 1/8” torrision bar. Going to install some 6 cylinder ones I have laying around I think it’ll help
That front end didn't have that much lift.......now i know why! The stiffer the spring the slower the lift(aka weight transfer to the rear tires.
The /6 t-bars will get the weight to lift and plant the back tire.:thumbsup:
these should help a lot and help on the gear ration(better 60' times)
Mickey Thompson 3019: ET Drag Slick 22.0 x 8.0-15 | JEGS
At 22" tall they my look out of place, unless you install some shorter tire up front.....BUT THEY WILL HOOK!
When i first started out i had a set of 22/?/15 Pirelli tires on the back, because i had 2.76 gears in the back.
Take my standard 26 inch tires off the back,put the Pirellis on to go race and then put the tall one back on to go home.
This worked well until i got my 3.91s and then, them little Pirellies just wouldn't bit any more.
It looked dorky as my font tires were 25" tall and my back was 22"........ A revers Stink Bug Look.:wtf::DBut it worked.
If you have the /6 bars already. That would be my first move. "0 dollar investment" and easy to change in a week end.........a couple hours if you have done one before.
Set the front adj shock as loose of a setting as you can get.(will extend with the least amount of effort).
