My 69 Dart "AKA" The Blue Mutt
well I am finally done under the car for now - after jacking with the transmission lines I got them clear of most everything but will replace them later and make my own, everything is tight, diff is full of fluid. The exhaust seems to have good ground clearance and I have the front height close to where I want it and the wheels set good enough to put it on the ground, I will deal with the alignment later on. wheels back on and sitting on the ground. I got started cleaning up the wiring which I should finish tomorrow then final assembly under the hood - looks like next weekend it will be ready to start and break in the new cam. I also added some mini valves at the block plugs, I blew out as much muck and ran bottle brushes through all the water ports, gonna do some flushing before I put in antifreeze and the new radiator. I want to look into raising the rear some, Im gonna eventually go to a 28" tire but sure want a little more rake to the car
well I am finally done under the car for now - after jacking with the transmission lines I got them clear of most everything but will replace them later and make my own, everything is tight, diff is full of fluid. The exhaust seems to have good ground clearance and I have the front height close to where I want it and the wheels set good enough to put it on the ground, I will deal with the alignment later on. wheels back on and sitting on the ground. I got started cleaning up the wiring which I should finish tomorrow then final assembly under the hood - looks like next weekend it will be ready to start and break in the new cam. I also added some mini valves at the block plugs, I blew out as much muck and ran bottle brushes through all the water ports, gonna do some flushing before I put in antifreeze and the new radiator. I want to look into raising the rear some, Im gonna eventually go to a 28" tire but sure want a little more rake to the car
