Project “Ghost Duster”, 1970 Duster Corner Carver
Just this weekend I replaced the factory linkage rods with rods I made with heim joints. I was amazed at the difference and wish I would have done this years ago. I adjusted pedal ratio by moving the rod closer to the pivot point on the clutch fork side. I tried it on the top coming off the pedal, but the rod hit the firewall. If you plan to do this, I'd recommend doing it now before installing the pedal box. It was not fun getting the factory pin off the pedal while under the dash!
Just this weekend I replaced the factory linkage rods with rods I made with heim joints. I was amazed at the difference and wish I would have done this years ago. I adjusted pedal ratio by moving the rod closer to the pivot point on the clutch fork side. I tried it on the top coming off the pedal, but the rod hit the firewall. If you plan to do this, I'd recommend doing it now before installing the pedal box. It was not fun getting the factory pin off the pedal while under the dash!
