Rally dash redo
If that's around 60 psi, its still pretty high for 8 - 900 rpm.
I'll keep an eye on it.
The sender I bought from BRE is supposed to be for 0 - 80 psi, replacing p/n 2495222
http://www.billrolikenterprises.com/proddetail.php?prod=2495222
Rolick has a different one that is stamped 100 psi that he says was used from march 71 to 74. p/n 3488609
The one on the engine now is NAPA Echlin OP6603, installed in 2000.
Online catalog says it rated for 90 psi.
https://www.napaonline.com/en/p/ECHOP6603
Need to think about how that might effect the gage reading.
After warming the oil up to 170ish F, oil pressure dropped to just above 6th mark.
If that's around 60 psi, its still pretty high for 8 - 900 rpm.
I'll keep an eye on it.
The sender I bought from BRE is supposed to be for 0 - 80 psi, replacing p/n 2495222
http://www.billrolikenterprises.com/proddetail.php?prod=2495222
Rolick has a different one that is stamped 100 psi that he says was used from march 71 to 74. p/n 3488609
The one on the engine now is NAPA Echlin OP6603, installed in 2000.
Online catalog says it rated for 90 psi.
https://www.napaonline.com/en/p/ECHOP6603
Need to think about how that might effect the gage reading.
