[FOR SALE] 1965 Valiant v-100

Hate to see it go, but it's time. I've been slowly returning this car to luster for 7ish years. Taken it on 400 mile roadtrips, commuted in it, even used it in photoshoots. I just don't drive it and hate to see it neglected.

Good:
225 slant 6
Shaved head 3/1000th’s
Oversized valves
Ported and polished head
Offenhauser intake
3-speed automatic column shifter
360≈ cfm Holly 4barrel carb and air cleaner
Pertronix electronic ignition and Flame Thrower II coil
Scare bird front disc conversion
Updated manual master cylinder with Wilwood adjustable prop valve.
rebuilt front end (5 years)
shocks (5 years)
Small race starter
front Anti sway bar
very nice wood steering wheel recently added
Rare wide small bolt pattern rims all around
Cooper Cobra tires
Interior upholstery in decent shape with a couple sore spots. (driver seat and some small punctures)
Refreshed interior paint
Body a little dinged up but have left it for a the look
upsized 1.75” exhaust to an 18” Cherry bomb glass pack. legit exhaust tone.
Sunpro 3 Gauge cluster
Sunpro low pro tach
Original glass
Comes with some extra parts
Starts up very quick even after sitting for a long time in the cold
Black steel rims with clean dent free dog dish hubcaps all around
Clean title
Gets a lot of love on the road and a good conversation starter at the gas pumps.

To-dos:
I suspect an experienced Mopar person could tune some more zest into what's there.
Rear left brake light doesn’t work due to a broken wire somewhere. 1965 comes with a couple gremlins as you know.
Factory fuel and temp gauges do not work. hence the Sunpros

$6500 obo

Would consider motorcycle or late 4x4 trades

Justin

RedB. said:

Does it have a 4 inch or 4.5 bolt circle ? could ya post a couple of pictures of the trunk as well as the door panels and front seat ?

Click to expand...

few more photos here for you, RedB.

Thanks, how are the tail light lens ?

RedB. said:

Thanks, how are the tail light lens ?

Click to expand...

the tail lights have some cracking in the lens plastic but are intact otherwise. i replaced the reverse lenses and gaskets at some point but the reverse lights themselves are not hooked up. never added the switch. speaking of door panels, you can see here the driver side isn't as good as the passenger. i cut new panels for both sides but had a harder time getting the driver side vinyl to go back on at the top trim edge.