Cam Thread

-

Rmoore

Well-Known Member
Joined
Nov 14, 2018
Messages
826
Reaction score
785
Location
Gun Barrel City, Texas
Anyone running a Howards Cam 722323-08
.259 and .263 at .50 advertised .291 and .295 .640 lift int and ex. 108 LSA. If so. I would think this dude would rock and roll
 
Advertised at 291/295 -
....... @.050, 259 - 263
with a, .640 lift on a 108.

Yea, sounds like fun!

What kind of cam is it?
 
Looks damn close to the Howard's solid roller in my car.
IMG_20181213_155825742.jpg
 
Running a Howards 260/264@50 solid in my car
Its on a 106, in at 102. Has a nice crackle to it. Super stocky sounding.
Good power
 
Anyone running a Howards Cam 722323-08
.259 and .263 at .50 advertised .291 and .295 .640 lift int and ex. 108 LSA. If so. I would think this dude would rock and roll

Hi, did you get this cam? How is it? I’m about to install it in my big block...
 
Years ago I ran a very similar UD grind in my old 906 headed 448.
259/264-108, .651/.651.

I thought it worked very well.

Solid 10’s@3670lbs.
 
Years ago I ran a very similar UD grind in my old 906 headed 448.
259/264-108, .651/.651.

I thought it worked very well.

Solid 10’s@3670lbs.
In my case it will be with 1.6 ratio rockers meaning .682 lift before lash, but my heads flow nice at .700 so I wated to take advantage of that without some crazy cam profile. My car gets a lot of street time and I have 3500 stall converter.
 
-
Back
Top