Something like this one:
Replied.PM sent...
Here is a picture of the proper linkage rods in this kit. Kind of spendy for the whole kit.
Maybe one of the guys on here has the single rod that you need.
I usually make up my own spring return tab and weld it onto the rod.
View attachment 1715594818
Little 411 for you.
The kd rod at the carburetor, does not need to be adjustable.
As long as the rod along the firewall is adjustable, you are good to go.
View attachment 1715595014
i have 2 with the spring tab on them BUT they are the non adjustable ones. sorry.
What setup are you running in the picture and do you know the length of the rod? Thanks
The adjustable kd rod along the firewall to the 904 trans is all stock 318 linkage. Throttle cable bracket is a 340 4bbl bracket. The non adjustable rod at the carb with the bracket, is the rod you just passed on.
That is the same rod I have and will not work. Here are pictures of it on mine. First one is in the stock location, it will not reach the outer part where its supposed ride. The second is on the other side of the cable bracket but it would go under the cable and still not line up with the cable. and the last is on the same side with the extention adapter and still not the right angle ore even the length. The 4 barrel rod has the side bend to it.
View attachment 1715595444 View attachment 1715595445 View attachment 1715595446
The rod you have in your pic is not the same one in my pic.
I tried helping you with a pic, the correct rod to get, and my experience, but you decided to fight me tooth and nail. You can lead a horse to water, but you can't make him drink.
I wish you luck.