I think I am off by 60*. Torsion bars

The adjuster is clocked to the side, and you probably need to put it back up in the air take the adjuster all the way out and the rest and reinstall the torsion bar with the lower control arm swing downward towards the ground more. Looks like you needed to have the control arm pointing down more toward the ground, like you off a hex. Show us how much adjuster bolt is in or out, that's a dead giveaway when the car sits too low and has the adjuster all the way in. Make sure to back them off when reinstalling then readjust them to stock height, screwed in about 1/4 sticking out from the bottom of the arm.