What Are You Doing To/With Your Car Today?
Replaced my homemade top radiator hose (2 silicone elbows and a piece of chrome sink drain pipe, with a soldered bung for a temperature switch) with a Gates 20630. It's a reasonable fit once 1.5" is removed from the radiator end. The Autocoolguy PWM controller uses a sensor in the outlet of the radiator, not the inlet, so I didn't need the switch any more.
O'Reilly actually had a Gates hose listing for '68 & '69 383 Darts, but apparently it's a mirror image (radiator top connection is on the left, and my aluminum radiator is on the right!)
Replaced my homemade top radiator hose (2 silicone elbows and a piece of chrome sink drain pipe, with a soldered bung for a temperature switch) with a Gates 20630. It's a reasonable fit once 1.5" is removed from the radiator end. The Autocoolguy PWM controller uses a sensor in the outlet of the radiator, not the inlet, so I didn't need the switch any more.
O'Reilly actually had a Gates hose listing for '68 & '69 383 Darts, but apparently it's a mirror image (radiator top connection is on the left, and my aluminum radiator is on the right!)
