Rebuilt Edelbrock, yea or nay
Well, I finally set aside time to get that Edelbrock torn down and cleaned up!
I tore it down one part at a time and 1st, checked the gasket of each part to make sure they are in good shape. Everything is good. I cleaned each part with Q-tips and carb cleaner. Then put part back together. I made sure all ports and places where gas goes through is clear of any obstructing particles, all clear! I did replace the Accelerator pump even though the ‘old one’ looked okay.
Well here are some pictures of my project.
And thank you all for the help, and to TT5.9mag for the Carburetor
Well, I finally set aside time to get that Edelbrock torn down and cleaned up!
I tore it down one part at a time and 1st, checked the gasket of each part to make sure they are in good shape. Everything is good. I cleaned each part with Q-tips and carb cleaner. Then put part back together. I made sure all ports and places where gas goes through is clear of any obstructing particles, all clear! I did replace the Accelerator pump even though the ‘old one’ looked okay.
Well here are some pictures of my project.
And thank you all for the help, and to TT5.9mag for the Carburetor
