The Demon is finally getting used
Making a fixture to install rear rail at there factory location. This will also place an inboard kit square in the car.
One fixture for both sides that can be moved using predrilled holes for both locations. The frame pin in the forward posts will locate front and back. The second single post will locate side distance and inboard kit location. He made the boxes with 1 inch spread on the holes in a mill to raise and lower the car and the post has a bushing that fits the box precice inside. The sliders will also be adjustable in 1 inch height increments.
I'll be going back down and take pics of most recent progress.
Making a fixture to install rear rail at there factory location. This will also place an inboard kit square in the car.
One fixture for both sides that can be moved using predrilled holes for both locations. The frame pin in the forward posts will locate front and back. The second single post will locate side distance and inboard kit location. He made the boxes with 1 inch spread on the holes in a mill to raise and lower the car and the post has a bushing that fits the box precice inside. The sliders will also be adjustable in 1 inch height increments.
I'll be going back down and take pics of most recent progress.
