Aero motive Phantom 200 Stealth fuel system
I'd like to know how you got the fuel lines the Torsion bar frame where the factory fuel line went threw
Harold Thank you
When I redid my fuel system a while ago, i added a 3/8 feed and converted the stock 5/16 to a return line
(i didnt use whatever system you used, but it doesnt sound like that is really pertinent here)
so, when it came time to feel the fuel line through the subframe, i drilled a hole through both sides, just a few inches from where the stocker went through
then i got a little piece of pipe that fit into that hole with about a 1 inch ID
i welded the pipe into the subframe and chamfered the walls so there is nothing for the fuel line to get stuck on
(im not even sure if i bothered putting some 1/2 vacuum hose around it, where it went through the pipe, because of how solid it allready sits)
