Compression/head gasket selection. 360

I'm building a 360 for the street/ occasional track day, Edelbrock Performer RPM aluminum heads (63cc chamber) KB 107 pistons (+5.00cc), block bored 30 over, xtreme energy hi lift cam 231/237@ .50
edelbrock RpM Air Gap intake, holley 750 carb and summit racing 1 5/8 headers.

Just got block back from machine shop and was running through my compression calculator. With a .050 fel-pro Gasket I will be at approximately 10.54:1. If I step it up to a .060 head gasket it will bring me down to 10.3:1. I will run on 93 octane. Will the thicker head gasket cause any problems?