Dash removal

I took a dash out with windshield in about 3 years ago so I was about 69. I have physical issues but still did it. Not sure I "would" now, but it wasn't that bad then. Just work "easy" and take your time Get so you are comfortable.

This car already had the cluster, radio, glovebox, and heater removed, and I've forgotten, may have had the column out as well. Of course all that must go, anyhow to get the dash out. And no seat. I laid on layers of cardboard, had two cutoff AKA die grinders, a "straight" one and a cheap 90 degree HF and some small cutoff wheels. It was not that difficult.

I've forgotton, there are ?6? bolts. You cut the clips and the bolts as I recall. Then loosen two hex head bolts down at the kick panels.

then you need to replace the clips the other way up, and I may have either used shorter screws or cut them down, I don't recall. You need some length at first to get them started. "Seems like" I put the screws in, snugged them down, then went back and pulled them one at a time, either replaced with shorter or cut them down. I don't recall.