Waterneck gasket info needed !

Dana67Dart said

I installed a Realgasket thermostat housing gasket on my cast iron 67 about 3 years ago and not a drop.

Caution. They are installed DRY as in NO sealers. And torked to (IIRC) 12 INCH pounds.

My cast iron intake is all pitted from 50+ years of leaking. And it has not leaked drop.

Also clean out the blind holes of debres.

Click to expand...

Dana67Dart said

I installed a Realgasket thermostat housing gasket on my cast iron 67 about 3 years ago and not a drop.

Caution. They are installed DRY as in NO sealers. And torked to (IIRC) 12 INCH pounds.

My cast iron intake is all pitted from 50+ years of leaking. And it has not leaked drop.

Also clean out the blind holes of debres.

Click to expand...

Thank you Sir , put gasket in today and zero leaks like u said requires very litt

Dana67Dart said

Again and I can't emphasize enough. DRY AND DO NOT OVER TIGHTEN.

oh and they are reusable

Click to expand...

Without a doubt the best water neck gasket I ever seen !!! NEW customer for life installed and barely tightened it up ran 20 mins and ZERO leaks !!
TN company I will buy any gasket they sale for my projects .
Those Felpro gaskets I tried 4 of them would weep after 30 mins run time and with $28 Good Stuff RTV on sticky side where white tape pulls off , again thank you for the great advice !!!!