Pipe bender
Here are some close up pictures of the 1" and 1 1/2" dies I made, to help show how the inner banding was welded in.
Then reached in with a new angle grinder disc to smooth up the welds. Finished it out with 80 grit on the DA sander as far in as I could reach then final finish by hand 80 grit.
Here are some close up pictures of the 1" and 1 1/2" dies I made, to help show how the inner banding was welded in.
Then reached in with a new angle grinder disc to smooth up the welds. Finished it out with 80 grit on the DA sander as far in as I could reach then final finish by hand 80 grit.
