8.75 durability for big block street/ Strip

A body said
With the heavier brakes I’m guessing 225lb Andy.... now go weigh it and see how close I am please! :) (I’ll up my guess if it’s not a spool in there)

mines approx 198ish as I weighed all the components a couple years ago when we had it apart checking things over.

....and as mentioned the S60 side adjusters are NICE for set ups and swaps. I run a set of 4.56 gears, but also have a set of 4.30 on a spool and they can be swapped fairly quick.

....if I had to do it again I’d a gone 9” based. Gear selection better and readily available.

I'll weigh the S60 when I pull it out. I'm replacing it with a 9 inch so I'll weigh them both to see if there is any difference. The S60 has a Detroit Locker in it so it is heavier than a spool. The 9 inch will have a S Trac in it and it will have a Pro series cast iron center so it isn't going to be a lightweight. I expect the 9 inch to be roughly the same weight as the S60, might be a few lbs lighter.