Cam phase suggestion advice

yellow rose said
How do you figure 108 centers the overlap??? The program I use show 111 centers it.

From the website I got this; so in post #7, I asked

AJ/FormS said
Is this the cam?
10200702
Hydraulic Flat Tappet. Mid level performance street cam with excellent drivability. Works well with stock type exhaust manifolds and dual plane intake with mild 4 bbl carb. Great 4X4 and performance marine cam where dry exhaust is used. Improved valve springs and roller rockers recommended.; Advertised Duration (Int/Exh): 262/268; Duration @ .050 (Int/Exh): 220/226; Gross Valve Lift (Int/Exh): .475/.494; LSA/ICL: 112/108; Valve Lash (Int/Exh): Hyd/Hyd; RPM Range: 1400-5800; Includes: Cam Only

112+108/2=110LSA

From that I determined that overlap is ;
(262+268)/2, less 2x110= 45*. I split that and gave 23* to the intake and 22* to the exhaust .
262 is the intake duration; taking one half of that, and subtracting the 23*, I get an ICL of 108*
Did I do it wrong?

Yeah I guess I did,dammit. I didn't read the fine print, namely LSA/ICL

That makes all my pressure numbers about 3 or so psi less..... which is a bad thing because it paints a rosier picture than it really is. However this combo is so close to the line that 3 psi is not really meaningful to the discussion,IMO.
Nevertheless I'm wrong and
Special thanks to @yellow rose for the clarification. Good catch.