1966 Dart Turn Signal Flasher Location?

-

coalman

Well-Known Member
Joined
Aug 6, 2015
Messages
1,223
Reaction score
135
Location
Texas
Does anyone have a picture of the correct location and installation of above? Thanks
 
I thought it was clipped on the driver's side of the brake/clutch pedal pivot bracket from '63 to '66. Going from memory sadly, was unable to confirm on vehicle.
 
I thought it was clipped on the driver's side of the brake/clutch pedal pivot bracket from '63 to '66. Going from memory sadly, was unable to confirm on vehicle.

Thanks for reply, my service manual stated by the ash tray, mounted on the receiver housing.
 
You're absolutely right. My ash tray housing was still there and had the clip in it as well as the telltale square hole instead of round. Did not have a '66 FSM to refer to. Did not mean to intentionally mislead.
 
You're absolutely right. My ash tray housing was still there and had the clip in it as well as the telltale square hole instead of round. Did not have a '66 FSM to refer to. Did not mean to intentionally mislead.

Not misleading to me, thanks for your input!
 
Just something I noticed. 65 and earlier darts look rounded. The 66 looks like a cross between a 65 and a 67.

My bet is that a lot of 66 related parts are VERY similar to 67. As others have said the turn signal is on the right side of the ashtray, just like in 67 up
 
Just something I noticed. 65 and earlier darts look rounded. The 66 looks like a cross between a 65 and a 67.

My bet is that a lot of 66 related parts are VERY similar to 67. As others have said the turn signal is on the right side of the ashtray, just like in 67 up

Thanks for input.
 
-
Back
Top