header on a 63-64 dart

-
M

moparraceman

Well-Known Member
Joined
Aug 1, 2010
Messages
2,519
Reaction score
589
Location
mansfield ohio
all these guys putting 340-360 engines in early darts 63-64 and running under chassie headers. what header are they using ? pictures,part numder ,and brand of header would ne help full thanks
 
AFAIK, only to fit manual steering with a 904. 727s are too wide and need the collectors altered/spread, 883s may run into clutch linkage interference and need mods.
Hedman makes a set of shorties for later As that will fit early As if you modify the #1 tube and collector- this also allows use of power steering. There's a thread covering the mods on here somewhere...
 
Hedman Husler will make you their fenderwell race headers...
 
Last edited:
We had Schumacher, but I am afraid he is done.
 
I have TTI in my 63 valiant with stroked 360. Not sure if valiant and dart have same header space issues. They are still a tight fit. Torsion bar runs through one of them. No power steering or power brakes but do have mini starter.
 
Professor Fate said:
AFAIK, only to fit manual steering with a 904. 727s are too wide and need the collectors altered/spread, 883s may run into clutch linkage interference and need mods.
Hedman makes a set of shorties for later As that will fit early As if you modify the #1 tube and collector- this also allows use of power steering. There's a thread covering the mods on here somewhere...
Click to expand...


Which hedman headers are you talking about?
 
Cuda416 said:
Which hedman headers are you talking about?
Click to expand...
The shorties for "67 & up.. I BELIEVE #78500.
There was a nice writeup about rerouting the #1 tube to merge with #5 and trimming the collector at the old #1- this not only let them fit the early As, but let it fit power steering, too. Pass side is a drop in.
Thought I had it bookmarked, but can't find the thread now. Search turned up references to it, but not the original thread. I'll post the link if I can hunt it down.
 
Not the one I was thinking of, but this thread may help.Removing stock exhaust manifolds
Couple of pics from the thread:
dart-drivers-side-header-jpg.jpg


dart-driverside-header-and-exhaust-pipe-jpg.jpg
 
You must log in or register to reply here.
-

Back
Top