[SOLD] Special Delivery Parts Run/ Road Trip

-
Status
Not open for further replies.

RAT ROD AL

MOPAR ARCHAEOLOGIST - one parts hoard at a time!
FABO Gold Member
Joined
Jan 18, 2013
Messages
7,753
Reaction score
10,202
Location
Robbinsville, North Carolina
Rating - 100%
262   0   0
Contact seller
:steering: Heading back up to the Smokey Mountains for some Fall Colors . Bringing a /6 to drop off in Macon. So I got to thinkin ! :realcrazy:. I have some parts that are big and would be expensive to ship. So if I throw this stuff in the back of my truck, Just maybe could say someone some shipping , and I could get rid of this stuff.

Here's my trip schedule :
Leaving Cape Coral Fl. This coming Monday morning. VIA interstate 75 N.
Plan on being in Macon Ga around 5pm. Make that drop off.
Continue on to Franklin NC, VIA hwy 441. Will be in and around Franklin till Saturday Morning.
Going back to Florida ,however . Well almost. The parts listed below is what I will have with me, If interested contact me here by PM. I'll take cash or paypal. I have to post the pics from my phone in the next post, so please be patient. :thankyou:
 
Last edited:
Ok here's what I will have with me.
#1 PENDING>>>>>>SOLD
A body V8 spool K frame 318/340/360
Comes with spool motor mounts for 340/360. $200 good condition.

20201016_175234.jpg


#2
A body 8 3/4 housing good condition has some rust pitting , Not to bad , just not show quality. The tabs for the brake lines are in bad shape. . $400
20201016_132719.jpg

20201016_132757(0).jpg

#3
A nice pair of springs 4 leaf , from a 67 V8 automatic cuda. Front bushings are good. $50
20201016_175736.jpg
20201016_175839.jpg

#4
I have a couple drive shafts. Each one is marked with its dimensions. Haven't had time to research these. Big Joint shaft $140, small $125
20201016_125709.jpg
20201016_125524.jpg


20201018_084600.jpg

20201016_125654.jpg

.....SMALL SHAFT PENDING.......SOLD
20201016_125703.jpg
 
Last edited:
These are the mounts that go with the K frame.PENDING. ......SOLD
20201009_143008.jpg
20201009_142950.jpg
20201009_142917.jpg


And this slip yoke goes with the small joint drive shaft. >>PENDING...SOLD....
20201016_125724.jpg
 
Last edited:
That's it. Any questions just ask ! Thanks for looking. Whoops got more.
Power gear box $125
Pump $50 with the box.
Now I done.:rolleyes:
:thankyou:

20201016_130451.jpg


20201016_130458.jpg


20201016_130341.jpg
 
Last edited:
I also have a 73 up A body, V8 radiator 318 -340 for manual trans. Looks good but selling as a core. Nice tanks and brackets. Might hold coolant,Don't really know. $75

20201009_162507.jpg


20201009_162527 (1).jpg


20201009_162456.jpg

20201016_221342.jpg
 
Last edited:
Ok here's what I will have with me.
#1 PENDING>>>>>>
A body V8 spool K frame 318/340/360
Comes with spool motor mounts for 340/360. $200 good condition.

View attachment 1715614209

#2
A body 8 3/4 housing good condition has some rust pitting , Not to bad , just not show quality. The tabs for the brake lines are in bad shape. . $400
View attachment 1715614210
View attachment 1715614211
#3
A nice pair of springs 4 leaf , from a 67 V8 automatic cuda. Front bushings are good. $50
View attachment 1715614212 View attachment 1715614213
#4
I have a couple drive shafts. Each one is marked with its dimensions. Haven't had time to research these. Big Joint shaft $140, small $125
View attachment 1715614216 View attachment 1715614218
View attachment 1715614217
.....SMALL SHAFT PENDING.......
View attachment 1715614215
can you double check the measurement on the large yoke drive shaft. thanks
 
In Franklin NC.
Price drop on rear end housing, $350
$60 on the radiator. Heading back to Florida on Saturday morning.
 
Status
Not open for further replies.
-
Back
Top