Reluctor

-
CRUZE 418

CRUZE 418

FABO Gold Member
FABO Gold Member
Joined
Mar 11, 2019
Messages
2,225
Reaction score
1,380
Location
Illinois
Could someone snap a picture of small block Mopar dist's reluctor wheel, rotor off. Was installing the FBO Mopar Mechanical Limiter Disc, when prying the reluctor wheel off, it popped and I don't know which slot the roll pin should go back into.
Here's a picture, 1200 o'clock or 600 o'clock?

20201018_193941.jpg
 
4spdragtop said:
Won't matter if they are 180* apart.
As the "good" girls say.....pick a hole.
Click to expand...

Yes it does matter. Notice in the photo one has a CW arrow. That is for use in small block, the opposite slot is what you use in a B/RB which rotates CCW
 
Oh yes it does matter! The picture in #2 shows a double stamped reluctor. Thank you for the help jammer and 273. I am working on it now, specifically that damn little spring clip, if you have ever done this, you know which spring I am referring to.
 
I figured B/rb would have different reluctor. Sooooo IF it was 180* offset I wouldnt think it would make a difference?
67Dart273 said:
Yes it does matter. Notice in the photo one has a CW arrow. That is for use in small block, the opposite slot is what you use in a B/RB which rotates CCW
Click to expand...
 
Take a look at the picture in the front of this thread, look closely and you will see that the roll pin slots are not 180° from each other.
Thank you for the reply!
 
Using phone...old eyes, small pics. I bet it would work tho.
RammerJammer75 said:
Just from looking at the photo it doesn't look to be 180*, just a little shy of that. Enough to make a difference I'm sure.
Click to expand...
CRUZE 418 said:
Take a look at the picture in the front of this thread, look closely and you will see that the roll pin slots are not 180° from each other.
Thank you for the reply!
Click to expand...
 
CRUZE 418 said:
Could someone snap a picture of small block Mopar dist's reluctor wheel, rotor off. Was installing the FBO Mopar Mechanical Limiter Disc, when prying the reluctor wheel off, it popped and I don't know which slot the roll pin should go back into.
Here's a picture, 1200 o'clock or 600 o'clock?

View attachment 1715615716
Click to expand...
Small block motor pin goes in the clockwise Arrow big block motor pin goes in the counterclockwise Arrow
 
You must log in or register to reply here.
-

Back
Top