67-72 V8 LH motor mount limiter plates

Thanks 4 the Kudos Kim. No need to put it on both sides. Engine always tries to lift on the left and pull on the mount. RH mount only compresses. People put torque chains on the left because that's the mount that fails. The mount pockets in the 67-72 K frame are slotted. Adjust the engine till level side to side, then bolt down. If you really need to, park car level, and set a bubble level across your carb going side to side then set the engine in place. I suppose you could put a spacer washer on the other side if you really wanted to.