What's your 2020/2021 Winter Project???
For me its multiple wintertime projects. This is actually a very ambitious list for my Sons 69 notchback. I got all the sheetmetal to redo it. Been working on it again now that the Texas heatwave is over. Where do I begin. Here's the list. I may not get to all of it over the winter, but I'm gonna try like heck in about this order below. The good thing is all the demolition work is done and out of the way. Almost everything that's staying is sandblasted and primered. This makes things go quicker. Trunk floor is prepped and temporarily screwed in place. That part is actually down to welding and grinding. So for the 69 notchback, my ambitious list is as follows
Weld in trunk floor (this coming weekend)
Replace rear valance
Replace butchered trunk hinge supports
Replace rusted out rear dutchman panel
Fab and rebuild rear window opening lower corners
Mod torsion bar hoop for 42RH.
Temp install a mockup junk block, and the 42RH trans to fabricate 42RH bolt up mount
Make and install better 2x3 box subframe connectors
Install new main floorpan & console brackets
Replace drivers side inner fender.
For my 67, to assemble the bottom end on my 408
For me its multiple wintertime projects. This is actually a very ambitious list for my Sons 69 notchback. I got all the sheetmetal to redo it. Been working on it again now that the Texas heatwave is over. Where do I begin. Here's the list. I may not get to all of it over the winter, but I'm gonna try like heck in about this order below. The good thing is all the demolition work is done and out of the way. Almost everything that's staying is sandblasted and primered. This makes things go quicker. Trunk floor is prepped and temporarily screwed in place. That part is actually down to welding and grinding. So for the 69 notchback, my ambitious list is as follows
Weld in trunk floor (this coming weekend)
Replace rear valance
Replace butchered trunk hinge supports
Replace rusted out rear dutchman panel
Fab and rebuild rear window opening lower corners
Mod torsion bar hoop for 42RH.
Temp install a mockup junk block, and the 42RH trans to fabricate 42RH bolt up mount
Make and install better 2x3 box subframe connectors
Install new main floorpan & console brackets
Replace drivers side inner fender.
For my 67, to assemble the bottom end on my 408
