Season 13, episode 7 of "Name these Parts"

-
ZooKypr

ZooKypr

Well-Known Member
Joined
Jul 5, 2009
Messages
2,058
Reaction score
270
Location
NJ
Looking to post these parts up for sale if I can ID them properly. I acquired them a couple years ago and they were mixed in with some 64 Barracuda and 67 to 69 Camaro parts.
Please reference the number next to the part and its application when you reply. Thanks!

20201028_171038.jpg
 
Last edited:
Number one looks like a throttle linkage bracket the bolts to rear of a block. My l/f heads had ones just like it
 
1,2,3,4 and 6 look to all be the kick down linkage for an early 273 ( I may be interested depending on price!)
1 bolts to the back of the head
2 bolts to the transmission kickdown to the swivel on the side of the trans.
3 goes from #1 to the swivel on the trans
4 goes from the carb to #1
(4 and 6 are the same part)
#8 is a LEFT door striker plate
 
Last edited:
Seems like I've seen #10. Bracket that holds the A/C condenser ( or what ever the bottle with the little bubble glass on it). On mopars.
 
Cudabnu said:
1,2,3,4 and 6 look to all be the kick down linkage for an early 273 ( I may be interested depending on price!)
1 bolts to the back of the head
2 bolts to the transmission kickdown to the swivel on the side of the trans.
3 goes from #1 to the swivel on the trans
4 goes from the carb to #1
(4 and 6 are the same part)
#8 is a LEFT door striker plate
Click to expand...

Thanks..I thought it had to be trans related but didn't want to assume. The previous owner wanted to do a 273 conversion on his Barracuda but gave up on the project.
 
What is the difference between the 2 and 4bbl, arm length?
 
#10 is the Strap that holds the screw up Jack for raising up the vehicle to change spare tire.
72 to 78 D series Pickups. Mounts on core support under the passenger side head light at the inner fender to core support.
 
8 looks like a flywheel/convertor bolt on stop for removing the damper or something. Dont know why it would have teeth if nothing else, maybe a little big? Or maybe a jack part.
 
As mentioned, #1 is transmission kickdown linkage for small-block V-8, at least same as in my 1965 Dart 2 bbl. Bolts to aft side of driver's cylinder head. 2-4 look like linkages for it. #8 might be a strap for a radiator overflow bottle, at least ones on later Mopars looked similar. My 1965 Dart had an aftermarket bottle and mount. #5 is a mystery, something which spins slowly.
 
Last edited:
#'s 1,2,3,4, &6 are kickdown linkage. I'd need a better photo of the upper bell crank arm on #1 to tell if it's a 2 bbl or '65 4bbl. It's not a '66 4bbl one however. Same with the other linkage parts....need a better close up photo with measurements. #7 looks like a '63-4 Jiffy Jet bag bracket. #8 is a RH door latch striker for a '64-6 model. #10 looks like a rear muffler hanger bracket, or, maybe an A/C dryer bracket.
 
You must log in or register to reply here.
-

Back
Top