Hood clearance

That intake is probably 2-3" higher than stock, so, you'll need a fairly short air cleaner. You probably won't know how much until you pull the old manifold, set the new one on the engine with the carb, and measure it. I haven't used that exact manifold, but, I've put on various Edlebrock and Offy intakes. Some, like Torkers and Dual Ports had no clearance problems. Others needed a short air cleaner......or like the stock unsilenced ones, a shorter filter element would sometimes suffice. Oh, and remember to put a shorter stud in too before you slam the hood with that new setup! Seen many a hood damaged that way.