Twin snorkel hood scoop for Duster
I got this one off evilbay. Not too bad. Front openings will need a bit of body work to be smooth, rounded, and opened up nice. Requires a bunch of sanding and filing on the mating surface and a little bodywork to fit flat. Pic shown of the side and front of a 69 barracuda hood was after I already ground and filed the **** out of to fit. For some reason theres a notch that was cut in the center of the back when the manufacturer cut this out of the mould. I will have to fiberglass that up. It does however pick up the stock mounting hole locations lining up with the access holes in the inner web of the hood. I used 1/4-20 threaded rod to make studs, then used SEMS nuts to bolt it on. I think I payed about $150 for it. It's not OEM but is pretty decent for the price considering the OEM ones are about $400-$500 for a real nice one
I got this one off evilbay. Not too bad. Front openings will need a bit of body work to be smooth, rounded, and opened up nice. Requires a bunch of sanding and filing on the mating surface and a little bodywork to fit flat. Pic shown of the side and front of a 69 barracuda hood was after I already ground and filed the **** out of to fit. For some reason theres a notch that was cut in the center of the back when the manufacturer cut this out of the mould. I will have to fiberglass that up. It does however pick up the stock mounting hole locations lining up with the access holes in the inner web of the hood. I used 1/4-20 threaded rod to make studs, then used SEMS nuts to bolt it on. I think I payed about $150 for it. It's not OEM but is pretty decent for the price considering the OEM ones are about $400-$500 for a real nice one
