Rust repair on some 72 Land Cruiser doors. I think it came out OK
One of my powder coating customers is working on a 72 Toyota Land Cruiser. The doors were pretty bad, and he asked me if they could be fixed. I said I could fix them, but it wouldn't be cheap. He couldn't find any decent used ones, so he said go ahead. The whole bottom half of the front had to come off, and I had to cut quite a bit of the bottom on the back side. First door is done with 3 coats of epoxy primer. I saved the worst for last. The second door will be more challenging.
One of my powder coating customers is working on a 72 Toyota Land Cruiser. The doors were pretty bad, and he asked me if they could be fixed. I said I could fix them, but it wouldn't be cheap. He couldn't find any decent used ones, so he said go ahead. The whole bottom half of the front had to come off, and I had to cut quite a bit of the bottom on the back side. First door is done with 3 coats of epoxy primer. I saved the worst for last. The second door will be more challenging.
