Not getting power to the ignition.

Copy. I’m learning. Thank you for you patience.

I was able to get power to the coil and I tested that all spark plugs are getting spark and they did get spark. Car cranked. I put a teaspoon or so of gas into the carburetor and it didn’t fire, so I tried again. Still did not fire. I then checked the spark plugs and at this point they’re wet with gas. I then went to Oreilys and get starting fluid. I spray a little in the carburetor and then try starting and the car backfired through the exhaust and on the second try it backfired through the carburetor. That’s where I’m at. I’m going to remove and clean the spark plugs with a wire brush, or just replace them entirely and try it again. First without anything added and then with a mix of starting fluid and a touch of gas.