'67 Fry Fix

Here's a tip for cleaning the k-frame, and anything else.

The degreaser, paint remover, worked well, and the map gas did work very well to get into the seams.

The best tool for the day was hot water, hot soapy water, and a scrub brush.

Here's the tip part, I installed a hot water tap outside, a couple actually. May not be news to many, but I've had them for years and they always are extremely useful.

Whether straight from the hose, or hooked to a pressure washer, it's the bomb.

Nothing worse than trying to clean up grease and then hitting it with cold water that only returns it to a solid.

I have a tankless water heater too, so I can easily turn up the temp and spray away forever.