Swap Slant 6 A833OD to 360LA Parts List?

OD Bellhousing.
Appropriate flywheel. Internal or external balance, whatever matches how you had the engine balanced.
10.5" clutch assembly.
The Z bar is the clutch torque rod assembly according to the factory service manual. It is the piece that connects to a bracket I believe bolts to the bottom of the cab on yours and runs to the bellhousing. It is a round tube about 1.5" in diameter and maybe 12" long with an arm sticking off each end. One end has the linkage from the clutch pedal and the other end has the linkage going to the clutch fork. Get under the dash, find the clutch pedal. Run up until you see the clutch rod that goes through the firewall. Come outside the truck and find where that rod comes through the firewall. Look what it attaches to. That's the Z bar. I BELIEVE the z bar and the clutch fork are both the same from slant six to V8. I BELIEVE. I could be wrong.

The biggest thing from this is to make SURE to get the correct balanced flywheel. Internal or external. Whichever one matches your engine.