Gordon Selbig
Well-Known Member
I wiggled my 318 dip stick tube to pull it out,to replace it. It snapped off.I checked a 273 and the tube length is shorter. Any tips to remove broken tube. Thanks
I found a chrome one from Autozone spectre 5721. Says it fits 318;340-360 was to long ,going to cut it and use old dip stick. Haven’t removed old one out ,yethi Gordon, my 69 340 tube is rusty crusty and bent so i removed it, do you know where i can get an exact replacement tube ... thanks Rich
I created my slide hammer for this chore. Fill flutes of 5/16 tap with bearing grease to hold the small amount of shavings. Length of all thread rod, a piece of black pipe, couple flat washers, and a nut.[/QUOTE