Does this look right to you?? Front suspension

-
illrad91 said:
isn't that the whole point of this website to get other peoples opinions? but ok dude
Click to expand...
I think what jos51700 is saying is that if you gave Denny a call or a quick email he could probably walk you through it pretty quickly since you're using some of his components as major suspension parts. I don't think he meant any disrespect at all. Denny makes some of the greatest parts you'll see on a Mopar and is extremely knowledgeable and would help you figure this out pretty quickly. It looks like you don't have all your components attached yet and this could be part of your problem. It would be a good idea to do some research too. The FSM or other vehicle specific manual has great reference and instruction for lots of your 67 systems. You can also search the suspension forum and find loads of great info.
Good luck...let us know how you make out.
 
67dartgtgo said:
I think what jos51700 is saying is that if you gave Denny a call or a quick email he could probably walk you through it pretty quickly since you're using some of his components as major suspension parts. I don't think he meant any disrespect at all. Denny makes some of the greatest parts you'll see on a Mopar and is extremely knowledgeable and would help you figure this out pretty quickly. It looks like you don't have all your components attached yet and this could be part of your problem. It would be a good idea to do some research too. The FSM or other vehicle specific manual has great reference and instruction for lots of your 67 systems. You can also search the suspension forum and find loads of great info.
Good luck...let us know how you make out.
Click to expand...

This. No disrespect intended.

Beyond that, as a manufacturer of things myself...if something is wrong I'd like to know about it ASAP. Especially critical stuff like 'spension components. Denny has similar commitments to quality.
 
jos51700 said:
This. No disrespect intended.

Beyond that, as a manufacturer of things myself...if something is wrong I'd like to know about it ASAP. Especially critical stuff like 'spension components. Denny has similar commitments to quality.
Click to expand...
no your absolutely right I really appreciate everyone also for the fast replies I completely understand this was my first time installing them and I read a couple forums where people said if your switching to fmj everything is switched from right to left and left to right and so I was really confused and on top of that I didn't install the bigger bumps which I did after I wasn't sure how it was supposed to look and I did give him a call and he assured me that it would be flush but I just wanted a second opinion. well I put the longer bump and it does seem to have gone mostly away but there is a tiny gap in the back but thats without it being ride height. everyone was a huge help seriously especially for a new comer like me
 
illrad91 said:
no your absolutely right I really appreciate everyone also for the fast replies I completely understand this was my first time installing them and I read a couple forums where people said if your switching to fmj everything is switched from right to left and left to right and so I was really confused and on top of that I didn't install the bigger bumps which I did after I wasn't sure how it was supposed to look and I did give him a call and he assured me that it would be flush but I just wanted a second opinion. well I put the longer bump and it does seem to have gone mostly away but there is a tiny gap in the back but thats without it being ride height. everyone was a huge help seriously especially for a new comer like me
Click to expand...
No worries. :D
 
You must log in or register to reply here.
-

Back
Top