Well I owe you a lot more than a timing chain cover still haha.
Stroking a 318 to a 390
- Thread starter 70aarcuda
- Start date
-
Well I owe you a lot more than a timing chain cover still haha.
I will! Hopefully sooner rather than later, I know someone who has a cuda and he needs help putting it back together!
I can pass those... the background check at least... idk about the permission part... I can just clean the parts for you 3 to install... everything I install doesn't work properly anyways
How much closer to the ground does that oil pan sit compared to stock?
So probably not much lower than the hooker headers lol.
Nope, and it will hit first to warn you!
Had to remove oil pan as no. 7 connecting rod was nudging the oil pick up tube where the nipple is welded on.......did not hit before i put the pan on....but....taking the pump off and a minute with the grinder on the nipple...all is good...
well...moving forward....got the lifters in......cleaned the deck and cleaned the deck.....got the head gaskets and the studs in place....cleaned the heads surface ..3 times.....put the heads on ....washers and nuts ....just spun them on with the battery power nut driver.....Torque them tomorrow and get the valve train....checked out and installed....
well...moving forward....got the lifters in......cleaned the deck and cleaned the deck.....got the head gaskets and the studs in place....cleaned the heads surface ..3 times.....put the heads on ....washers and nuts ....just spun them on with the battery power nut driver.....Torque them tomorrow and get the valve train....checked out and installed....
Last edited:
DARTGAME
SuPeRcHaRgEd
Tag and bag? Or going in one of your hot rods?
-
